|
|
|
Particulate
Filters |
| |
 Particulate
filters remove harmful oil/water condensate, pipe scale, dirt
and rust from you compressed air system. This prevents corrosive
damage to compressed air equipment and finished products. Typically,
particulate filters are installed upstream of regulators to
prevent valve failure. Thare are also used as pre-filters to
oil removing and coalescing filters to insure high efficiency
and long element life in applications such as paint spraying,
instrumentation and pharmaceuticals. |
| |
|
|
Coalescing
Filters |
| |
| A
coalescing filter functions in a different way from a standard
particulate filter. Air flows from inside to outside through
a coalescing media. Coalescing, by definition, means "
To come together". It is a continous process by which small
aerosols come in contact with the fibers in the filter media,
uniting with the collected aerosols and growing to emerge as
a droplet on the downstream surface of the media which by its
weight is gravitationally drained away. For maximum performance
and effciency, coalescing filters should be preceded by and
F3 particulate filter. |
| |
|
|
Adsorber
Filters |
| |
| Arrow's
adsorber filters were engineered specifically for those application
that will not tolerate the presence of oil vapors and associated
odors. The core consists of multi wrapped layers of impregnated
40 micron activated charcoal particles to increase its purification
qualities. If the compressed air has been prepared by a suitable
refrigerant dryer and oil removing filter, the Adsorber will
ensure oil concentration of .01 PPM by weight. |
| |
|
|
Oil
Removing Filters |
| |
| Arrow's
Oil Removing Filters offer general industrial filtration with
low pressure drop and long element life. They are used with
older compressors where downstream oil carryover is excessive
and when longer element life and low pressure drop are a concern. |
| |
|
| Two-in-One
Coalescing Filters: |
|
Two-in-One
Coalescing Filters |
| |
| The
Arrow Two-in-One filter maximizes filter efficiency, extends
element life and allows for easy maintenance. Air travels through
the .03 micron element which coalesces oil aerosols into liquid
form. Oil Removal occurs on the outer layer of the element and
accumulates in the bowl sump. |
| |
|
|
In-Line
Nipple Filters |
| |
| This
inexpensive disposable in-line nipple filter is ideal for filtration
of water, oil and air. It is compact and lightweight and can
be installed at the point of use. |
| |
|
|
In-Line
Tool Filters |
•
9132 |
| |
| This
unique, compact in-line filter provides low pressure drop, high
air flow and is designed for air tools. The inlet can be attached
directly to pneumatic tools, protecting the tool with a 40 micron
sintered element. |
| |
|
| Air & Oil In-Line
Tool Filters: |
|
Air
& Oil In-Line Tool Filters |
| |
| This
in-line filter is designed specifically for the protection of
small air tools, such as impact wrenches, nut runners, grinders
and screwdrivers. |
| |
|
| Hydraulic In-Line
Filters: |
|
Hydraulic
In-Line Filters |
| |
| These
hydraulic in-line filters provide protection for small, high
pressure systems up to 3,000 PSI. |
| |
|
| Hydraulic In-Line
Filter - Tee Type: |
|
Hydraulic
In-Line Filter - Tee Type |
| |
| These
hydraulic in-line filters provide protection for small, high
pressure systems up to 5,000 PSI. |
| |
|
|
|
